Dark Light
,

Noise generator The Stealth DNG2300DTN

(3 customer reviews)

The Stealth DNG-2300 is designed to prevent listening though devices that cannot be detected by conventional countermeasures and installed around the perimeter of a room – wired wall microphones, contact microphones, AC outlet transmitters and window systems based on the reflection of laser/infrared/microwave beams. It is an excellent addition to high level countermeasures.
It uses a combination of transducers and speakers placed strategically throughout a target area to create a blanket of masking noise that covers private conversations from eavesdropping.
It is well-known that sound distributes though walls, doors, windows and other constructions. In some materials sound travels even better than through air. For example, water is a good conductor and a heating system can pass a conversation out of a room. Eavesdroppers take advantage of this with the use of contact microphones. These microphones pick up the vibrations from the air ducts, plumbing, structures, walls, windows, doors, floors, ceilings and more. The microphones may not be in the same room as the conversation, but may be several floors or rooms away attached to a pipe or other fixture.
The Stealth DNG-2300 can render these devices useless. It produces non-filterable acoustic noise which is transferred to constructions by transducers and speakers. REI’s TRN-2000 is the recommended transducer for use with the Stealth DNG-2300. It has optimal power parameters and can be set on different types of surfaces. The TRN-2000 injects most of its power into surfaces while only a tiny part of the noise gets inside a room. This does not force people to speak louder. The TRN-2000 transducer can be supplied with adapters for mounting on walls, ceilings, windows, etc.
The speaker OMS-2000 can also be used with the Stealth DNG-2300. It does not inject the noise into the surfaces but radiates it into surrounding space. The OMS-2000 is usually used in air ducts, ceiling tiles, etc.
It protects from
– Electronic stethoscopes (contact microphones)
– Microphones built in the walls or other constructions
– Laser and microwave surveillance systems using reflections from the windows
– Other vibro-accousic ways of information’s leakage
– Frequency response: 250-6500 Hz
– Power: 110 V AC, 220V AC

$751.30

Compare
$6,838.26 for 3 item(s)
SKU: 5487FB8/21 Categories: ,

Technical Specifications

Digital Noise Generator DNG-2300
Size
1.7 x 5.9 x 10 in. (4.4 x 15 x 25.4 cm)
Weight
2.2 Kg
Output Max
2 x 8W
Min. load channel 1,2
3 ohms
Min. load channel 3
8 ohms
Frequency
250-5000 Hz
Power
110 V 60 Hz (220V 50 Hz)
 
Transducer TRN-2000
Size
3 x 1.25 in. (7.6 x 3.1 cm)
Weight
1 lb (454 g)
Impedance
6 ohms
 
Omni Speaker OMS-2000
Size
5 x 5.75 in. (12.7 x 14.6 cm)
Weight
2 lb. (907 g)
Impedance
24 ohms
 
Probe microphone DNG-MIC
Output Level
1 V
Weight
110 grams

 

Based on 3 reviews

4.3 overall
1
2
0
0
0

Add a review

  1. John Doe

    Fusce vitae nibh mi. Integer posuere, libero et ullamcorper facilisis, enim eros tincidunt orci, eget vestibulum sapien nisi ut leo. Cras finibus vel est ut mollis. Donec luctus condimentum ante et euismod.

    John Doe

  2. Peter Wargner

    Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Suspendisse eget facilisis odio. Duis sodales augue eu tincidunt faucibus. Etiam justo ligula, placerat ac augue id, volutpat porta dui.

    Peter Wargner

  3. Anna Kowalsky

    Sed id tincidunt sapien. Pellentesque cursus accumsan tellus, nec ultricies nulla sollicitudin eget. Donec feugiat orci vestibulum porttitor sagittis.

    Anna Kowalsky

You may also like…

SHOPPING CART

close