DC 12V Single Door 280kg Magnetic Door Lock


100 in stock

Use magnetic power to lock the door, 180kgs (350lbs) holding force
Built-in reverse current protection device (MOV)
Alluminum shell adopts high strength material, with hard anodised processing
Corrosion resistant
Good quality and durable to use
Can be opened by push button, remote controller, etc
Fit for wooden door, metal door, glass door, fireproof door, etc.

What is in the Box
1 * Electronic magnetic lock
1 * Armature plate
1 * Bag of installation kit

14,000.00 18,000.00

100 in stock

14,350.00 for 3 item(s)

How Magnetic Door Lock Works?

Magnetic door lock solutions for buildings use is for stopping unauthorized people from gaining access into specific areas. Those who need to gain entry into these areas must have  permission to go in. A  form of Identification will be needed to alert the access door entry system. This will send  signal to unlock the door for authorised access. These locks when install on fail-safe doors as well as fail-secure ones. However, they’re more often used in fail-safe doors.

Fail Safe Door

On the fail-safe door, the armature plate and magnetic door lock mechanism lock together when an electrical current passes through them. When the electrical current is interrupted, the lock will become disengaged until the power flows through the locking device again. A door access control system will send the signal to interrupt the current, so the door can be opened for a moment while a person passes through. When the door closes, door entry systems will allow the current to flow again, and the lock will engage.

For the fail-secure door lock, electricity is applied through the lock to keep it unlocked. This energizes the mechanism, so when the power goes out, for whatever reason, the door would then lock. You’ll see this in specific entryways used for fire prevention and to keep people from getting in. When electricity comes back on, the door will then unlock.

Magnetic Door Lock Installation is easy- These locks don’t have any bolt to extend and lock into a strike plate. You simply install the armature plate on the door, and the magnet mechanism on the door frame, and attach the electrical wiring to power the magnetic lock. Whatever access door entry systems you use will also have to connect to the lock, so it can send the signals to unlock the








SKU: 5487FB8/28 Categories: ,

Holding force: 180kgs
Voltage: DC 12V
Current: 380-430mA
Working temperature: -10 to 55 Celsius degree (14 to 131 Fahrenheit degree)
Humidity: 0 to 95%
Working mode: power-on to lock
Lock size: 17 * 3.8 * 2cm / 6.7 * 1.5 * 0.7in
Lock weight: 499g / 17.6oz
Plate size: 13 * 3.3 * 1cm / 5.1 * 1.3 * 0.4in
Plate weight: 331g / 11.6oz
Package size: 20.5 * 5.7 * 5.7cm / 8 * 2.2 * 2.2in
Package weight: 953g / 2.1lb

Based on 0 reviews

0.0 overall

Be the first to review “DC 12V Single Door 280kg Magnetic Door Lock”

There are no reviews yet.

You may also like…